Installing Solar at Woodhenge.org
Jim Juczak’s power system was damaged by their recent house fire. A group of us went to help them rebuild various aspects from sheetrock to applying primer. My son Matt and I tackled upgrading and repairing the power system. Jim had built wooden frames for the 12 new solar panels. These panels are a bit different than the usual ones we run across. Each panel is a 45 watt, 98 volt open circuit amorphous panel. Matt and I built combiner boxes and wiring whips so that each frame will hold 4 panels wired in parallel, and a master combiner box that parallels the 3 frames, feeding the Outback MX-60 in the house. The house contains a 24 volt Trojan L16 battery pack.
Each frame has a small combiner box connecting the 4 panels with 12 gauge cable to a 10 gauge uplink to the master combiner box. The master combiner uplinks to the house with 6 gauge. See pics at http://ph.groups.yahoo.com/group/12VDC_Power/photos/browse/5156?c=
They bought a 40′ shipping container to put belongings in while the house is being finished, so we put a temporary pv system on that as well for internal lighting.
We go back next weekend to fix the wind turbine and install some ground lines for the panels.
Related posts:
- Solar Upgrade Progress
- Green-Trust.org and Woodhenge.org on Discovery’s Science Channel
- Building a solar array at woodhenge.org
- My favorite RE discussion groups
- Free DIY Solar Install Guide
