Green-Trust.Org

All the wiring indoors, consisting of the pv fused disconnect, the MX-60 charge controller, the fused controller disconnect, and the two pv shunts for the FlexNet DC Monitor have all been installed. We are still waiting on the replacement Mate to come back from Outback, and we are waiting for one pole mount pv rack. As a temporary measure, we made pv mounts using two pallets per panel (six 195 watt panels) in a 45 degree angle, with 2×4 struts on the sides as supports. Pictures to follow. The combiner box was wired to the house with 50′ of 4g 2 conductor with ground. The combiner box connects to the panels with 6′ of 12g 2 conductor with ground.